ASC 1000 Series MULTI Max Rack DC Supply Systems
Battery chargers are intended to provide uninterrupted DC supply to connected loads such as protection, measurement, automation and switching equipment and systems.
- Earth (+, -) Leakage Alarm
- Over and Low Temperature
- DC Output Voltage Low and High
- AC Input Voltage Low and High
- AC On
- Overload
- Current Limitation
- Batteries Disconnected
- RTC Battery Low
- Battery Alarm
- Normal Charge / Boost Charge
Above notifications can be monitored and signals
transmitted to Scada.
Relko Enerji’s Muti Max Series battery chargers manufactured in Turkey, fulfills the requirements and has full compliance to latest specifications., our battery chargers are type tested recently (2019) to IEC specifications and comply to latest KM standards and requirements.
MULTI Max Series comes with redundant control by “Master Control Unit” and “Slave Control Unit”. So the users either control the charger with Master unit or Slave unit easily.
To cater the needs of Secondary Electricity Distribution Segment in Qatar, we manufacture two product ratings:
1) ASC1030-10A (24Ah Multimax-T with KM approved Batteries)
2) ASC1048-35A (62Ah Multimax-T with KM approved Batteries)
- Designed with SCR Based Microprocessor
- Designed with Current and Voltage Regulators
- Stable Output Voltage, Perfect Discharge Curves
- Boost and Normal Charge (Automatic/Manual)
- Low Ripple Voltage
- Remote Signaling Scada Communication via Modbus (RS232/RS485)
- Natural Cooling – No Fans included
- Withdrawable Battery Tray
- Powerful / Robust Transformers and Internal Components
- Temperature Compansation
- Wide Graphical LCD Control Panel
- Redundany for both control and Signals
- Event Record (20 events FIFO)
- Automatic Battery Maintenance,(extend the life time of batteries)
- Removal battery trays or easy maintenance
MULTI Max Series can be used in different areas such as Power Transmission and Distribution,
Chemical Industry, Water and Waste Water Industry..
System parameters are easy to monitor via its control panel. These parameters;
a. Battery Voltage
b. Battery Current
c. DC Output Voltage
d. Output Current
e. AC Voltage
f. AC Current
g. Frequency
h. Temperature
i. Charge Mode
j. Date / Time
k. Battery Level (% and Graphical)
l. Fault Notifications
To charge the batteries in most suitable way and extend their life time, MULTI Max is designed with current and voltage regulators and automatic battery maintenance function. The ripple voltage is <%3 without battery and <%1 with Battery.
MULTI Max Series are available from 5 to 100A in single phase input configuration with offering output voltage 24, 48, 110 and 220Vdc.
Thanks to our own R&D department, all electronical and mechanical designs are carried out by ourselves for improved reliability and adaptability to industrial requirements.
MULTI Max Series have easy to use HMI for quick on-site adjustments and software for on-site and offline adjustments.
MULTI Max Series have an additional control unit (Slave Unit) for redundancy. Please see the below pages for parameter setttings.
MULTI Max Series have analogue measurement equipments included to check the Voltage and Current besides HMI.
MULTI Max Series can be manufacture according to your special requirements. Depending on the charge current, battery capacaity and enviromental conditions, the dimensions and weight may vary and adapt exactly as customer requirements.
- Please check the dimensions and weight after ordering the optional modules, different charging current or battery capacity.
Optional Intelligent VRLA Battery monitoring system is avaliable for analyzing SOH of Block battery, SOC of String battery, Curve Trend analysis, Bar Graph report and Threshold Alarm.
MULTI Max Series are able to measure Block Battery’ s Voltage, Temperature and Inner resistant (ohm).
We are ready to be your energy
