SIU C- GERİLİM & FREKANS KORUMA RÖLELERİ
SIU-C, yüksek, orta ve alçak gerilim dağıtım sistemlerinde trafolar ve elektrik makineleri için en iyi ve en hassas koruma çözümünü sunar. SIU-C voltaj ve frekans koruma rölesidir ve aynı zamanda yük atma ,dekuplaj ve şebeke kaybı (Adalanma) koruması için kullanılır. SIU-C evrensel 24-230 VDC/AC yardımcı güç kaynağı ile enerjilenir.
Doğrudan alçak gerilim hattına bağlandığında 1.000 volta kadar ölçüm yapabilme özelliği ile dikkat çekiyor. Voltaj ölçümü: Geleneksel için 5 voltaj kanalı.
Haberleşmeye izin vermek için röleler, ön bağlantı portu yerinde haberleşme için bir mikro USB ve Arkasındaki farklı türde bağlantı portları ve protokollerle uzaktan haberleşmeye olanak sağlar; RS485 Bağlantı Noktası: IEC60870-5-103, IEC61850, Modbus RTU veya DNP3.0 Seri Protokol desteği. RJ45 Bağlantı Noktası: Modbus TCP/IP, DNP3.0 TCP/IP veya IEC60870-5-104 + Web Sunucusu + SNTP Protokol desteği.
SIU-C, 11 yapılandırılabilir AC/DC giriş ve 5 yapılandırılabilir AC/DC çıkış sağlar. Dahili RTC’si (gerçek Zaman Saati) sayesinde tarih ve saati koruyan, geçici olmayan RAM belleği sayesinde 3072’ye kadar olayı ve bozulma arıza kaydını (DFR) depolar.
Fanox, kendi SICom İletişim Programı ile osilografi kaydının indirilip COMTRADE formatında (IEEE C37.111-1991) kaydedilmesine olanak sağlar.
- The SIU-C is a voltage and frequency protection relay for transformers and electrical machines, in high, medium, and low voltage distribution systems. Also protects decoupling, load shedding, and loss of main (islanding), universal with auxiliary the power supply of 24-230 Vdc/ac.
- Voltage measurement: 5 voltage channels for conventional VTs.
- The capability of measuring up to 1.000 volts when it is connected directly to the low voltage line.
- Metallic box with high electromagnetic compatibility level (EMC) and a wide range of operating temperatures.
- Protection of decoupling, load shedding, and loss of main (islanding). Loss of Main (islanding) occurs when part of the public utility network loses connection with the rest of the system. If this situation is not detected, then the generator could remain connected, causing a safety hazard within the network. Automatic reconnection of the generator to the network may occur causing damage to the generator and the network. SIU-C protection relay detects this situation thanks to its voltage and frequency functions focused on the Rate of change of frequency (ROCOF) method.
- Signaling/control of the circuit breaker (52 function) and the recloser (79 function).
- To allow the communication, relays are provided with a local micro USB front port and with remote communication with different options (ports and protocols) on the rear side:
- Rear RS485 Port: IEC60870-5-103, Modbus RTU or DNP3.0 Serial.
- Rear RJ45 Port: Modbus TCP/IP, DNP3.0 TCP/IP or IEC60870-5-104 + Web Server + SNTP Protocol
- Synchronization through IRIG-B is optional depending on the model.
- The SIU-C is provided with 11 configurable inputs and 5 configurable outputs.
- The SIU-C is fitted with the demand of voltage (Load Data Profiling) with the following characteristics:
- The number of records: 2160.
- Recording mode circular.
- Sampling rate (interval): configurable through communications (1-60 min).
- An alarms panel is available.
- SIU-C is provided with non-volatile RAM memory in order to store up to 3072 events and disturbance fault recording (DFR), maintaining date & time thanks to its internal RTC (Real Time Clock).
- 5 records in data and COMTRADE format (300 cycles each record): 1 to 8 pre-fault cycles + 292 to 299 postfault cycles.
- 25 records in data and COMTRADE format (60 cycles each record): 1 to 8 pre-fault cycles + 52 to 59 postfault cycles.
- 50 records in data and COMTRADE format (30 cycles each record): 1 to 8 pre-fault cycles + 22 to 29 postfault cycles.
- 100 records in data and COMTRADE format (15 cycles each record): 1 to 8 pre-fault cycles + 7 to 14 postfault cycles.)
- The oscillography is downloaded by a communications port.
The SICom communications program allows the oscillography record to be downloaded and saved in COMTRADE format (IEEE C37.111-1991).
59 Phase overvoltage (Bus Bar)
59-L Phase overvoltage (Line)
59N/G Calculated/Measured neutral overvoltage (Bus Bar)
47 Phase Balance voltage protection (Bus Bar)
27 Phase Undervoltage (Bus Bar)
27-L Phase undervoltage (Line)
27V1 Positive sequence Undervoltage (Bus Bar)
∆V/∆t Rate of change of voltage
81O/U Under/Overfrequency
81R Rate of change of Frequency (ROCOF)
78 Out of Step (Vector Shift)
24 Overfluxing
79 AC Reclosing device
HLT Hot Line Tag
52 Breaker wear monitoring
25 Synchro Check
BF Circuit Breaker Failure
74TCS Trip Circuit Supervision
74CCS Close Circuit Supervision
49T External Trip
86 Trip lockout
PGC Programmable logic control
ADDITIONAL FUNCTIONS
CNT Counters
RTC Real Time Clock
ALRM Alarm panel
PGC Programmable Logic Control
HMI Human Machine Interface
SER Sequential Event Recording
DFR Disturbance Fault Recording
LDP Load Data Profiling
MET Metering
STTG Settings Groups
CMMD Commands
Communication Software for SIA & SIL protection relays
The SICom PC software has been designed and programmed to gain access to all of Fanox relays information, to modify the settings and configuration, check states and measurements and to analyse and save events and fault reports using a graphic-friendly user interface.
SICom software works with the Windows®7, Windows®8, Windows®8.1 y Windows®10 operating system.
- General data reading: Complete model, Version, Serial number, etc.
- States reading
- Measurements reading
- Reading and changing settings
- Reading and changing configuration
- Reading and deleting events
- Reading and deleting fault reports
- Reading and deleting demand current (load data profiling)
- Reading and saving oscillographic records in Comtrade format
- Changing the user passwords
- Saving and Loading settings files
- Saving and Loading configuration files
- Saving events and fault reports
- Saving demand current (load data profiling)
- Date-time synchronization
- Configuring the communication parameters
- Reading and changing counters
- Commands for opening and closing the circuit breaker and block/unblock the recloser
- Configuration of the inputs
- Configuration of the outputs
- Configuration of the causes that start a Fault Report
The update of the software does not require any user´s action, this is, if the computer is connected to Internet, SICom updates itself when it is started.
It will allow you to prepare all the settings and relay configurations without having the relay connected to the PC (offline mode), reducing engineering and commissioning time.
SICom program uses Modbus protocol, so only the ports with this protocol can be used to establish the communication.
| SIL-A | SIU-C | SIL G | SIL-C | |
|---|---|---|---|---|
| Type | OC & EF PROTECTION | VOLTAGE & FREQUENCY PROTECTION | LINE, FEEDER AND GENERATOR PROTECTION | LINE, FEEDER AND GENERATOR PROTECTION |
| Auxiliary Supply | 24-230 Vdc/Vac | 24-230 Vdc/Vac | 24-48Vdc or 48-230 Vac/dc or 24-230 Vac/dc | 24-230 Vdc/Vac |
| Consumption | 3,3 – 4,5 W | < 6 W. 24-230 Vdc/Vac < 10VA | 24-48 Vdc and 48-230 Vac/dc < 10VA. 24-230Vac/dc < 20VA | 24-230Vac/dc < 20VA |
| Current measurement | Standard CT > 0,5VA | n/a | Standard CT > 0,5VA | Standard CT > 0,5VA |
| LPCT | n/a | n/a | n/a | n/a |
| Voltage measurement | n/a | VT or directly to the low voltage line | VT or directly to the low voltage line | VT or directly to the low voltage line |
| VT connection type | n/a | Adjustable | Adjustable | Adjustable |
| 50 | 2 | n/a | 2 | 2 |
| 50G | 2 | n/a | 1 | 1 |
| 50N | 2 | n/a | 1 | 1 |
| 50/51 | 2 | n/a | 4 levels of 67 * | 4 levels of 67 * |
| 50/51G | 2 | n/a | 2 levels of 67G * | 2 levels of 67G * |
| 50/51N | 2 | n/a | 2 levels of 67N * | 2 levels of 67N * |
| 67GI | 1 | n/a | 1 | 1 |
| 67NI | 1 | n/a | 1 | 1 |
| 50/51/67G | 1 | n/a | * | * |
| 50/51/67 | n/a | n/a | * | * |
| SOFT | 1 | n/a | 1 | 1 |
| 64REF | 1 | n/a | 1 | 1 |
| 52 | 1 | 1 | 1 | 1 |
| BF | 1 | 1 | 1 | 1 |
| 49 | 1 | n/a | 1 | 1 |
| 49T | 1 | 1 | 1 | 1 |
| 79 | 1 | 1 | 1 | 1 |
| HLT | n/a | √ | √ | √ |
| 46 | 1 | n/a | 1 | 1 |
| CLP | 1 | n/a | 1 | 1 |
| 74TCS | 1 | 1 | 1 | 1 |
| 74CCS | n/a | 1 | n/a | n/a |
| Trip Block | 1 | n/a | 1 | 1 |
| 68 (Trip Bus) | 1 | 1 | 1 | 1 |
| 86 | √ | √ | 1 | 1 |
| 46BC | √ | n/a | 1 | 1 |
| 60CTS | 1 | n/a | 1 | 1 |
| 60VTS | n/a | n/a | 1 | 1 |
| Programmable Logic | V3 | V3 | √ | √ |
| 37 | 1 | n/a | 1 | 1 |
| 59 | n/a | 2 | 2 | 2 |
| 59N | 1 | 3 | 2 | 2 |
| 47 | n/a | 1 | 1 | 1 |
| 27 | n/a | 4 | 2 | 2 |
| 27V1 | n/a | 2 | 1 | 1 |
| 32/40 | n/a | n/a | 4 | 4 |
| 81U/O | n/a | 8 | 4 | 4 |
| 25 | n/a | 1 | 1 | 1 |
| 24 | n/a | 2 | 2 | 2 |
| 59-L | n/a | 1 | 1 | 1 |
| 27-L | n/a | 1 | 1 | 1 |
| 81R | n/a | 6 | 4 | 4 |
| 78 | n/a | 2 | 1 | 1 |
| IRIG-B | n/a | Optional | Optional | Optional |
| Counters | √ | √ | √ | √ |
| Commands | √ | √ | √ | √ |
| Sett. Group | 4 | 4 | 4 | 4 |
| Inputs | 3 / 5 / 6 / 9 | 11 | 8 / 16 / 24 / 8 + 4 AFD | 11 |
| Outputs | 3 / 4 / 5 / 6 / 7 | 5 | 7 / 11 / 18 / 7 + 4 HS-O | 5 |
| LEDs | 8 configurable | 11 configurable | 11 configurable | 11 configurable |
| HMI | 20x2 LCD + 11 keys | 20x4 LCD + 13 key | 20x4 LCD + 13 keys | 20x4 LCD + 13 keys |
| 52 & 79 HMI | 2 LEDs + 4 keys | 2 LEDs + 4 keys | 2 LEDs + 4 keys | 3 LEDs + 4 keys |
| Event | 2048 | 3072 | 3072 | 3072 |
| Fault Report | configurable up to 100 | configurable up to 100 | configurable up to 100 | configurable up to 100 |
| Oscillography | Configurable up to 100 records | configurable up to 100 | configurable up to 100 | configurable up to 100 |
| Current demand | √ | n/a | √ | √ |
| Local Port (frontal) | Micro USB | Micro USB | Micro USB | Micro USB |
| Remote Port (rear) | RS485 or Ethernet | RS485 or Ethernet | RS485 or Ethernet or Fiber Optic | RS485 or Ethernet |
| Communications Protocols | RS485 (ModBus RTU or IEC60870-5-103 or DNP3.0 Serial) RJ45 (Modbus TCP/IP or DNP3 TCP/IP or IEC 60870-5-104) RJ45 (IEC61850) + SNTP protocol | RS485(ModBus RTU or DNP3.0 Serial or IEC60870-5-103) RJ45 (Modbus TCP/IP or DNP3.0 TCP/IP or IEC60870-5-104) + SNTP protocol | RS485(ModBus RTU or DNP3.0 Serial or IEC60870-5-103) RJ45(Modbus TCP/IP or DNP3.0 TCP/IP or IEC60870-5-104) RJ45(IEC 61850) FO-LC(IEC61850) + SNTP protocol | RS485(ModBus RTU or DNP3.0 Serial or IEC60870-5-103) RJ45 (Modbus TCP/IP or DNP3.0 TCP/IP or IEC60870-5-104) + SNTP protocol |
| Size of | 177 x 107 mm | 177 x 107 mm | 198 x 187 mm | 177 x 107 mm |
We are ready to be your energy
